JournalLicensing

Water treatment technologies available for licensing in India

Water treatment technology licensing in India: public lab technologies on offer for arsenic, fluoride, iron and desalination, their fees, and what to check.

By Sahil Sheikh, Regd. Patent & Trademark Agent, cRTTP 7 min read

Part of the guide Licensing technology from Indian institutions: the complete guide for companies

Short answer

Indian public laboratories license water treatment technologies to manufacturers. BARC alone lists 18 water technologies, covering arsenic, fluoride and iron removal, ultrafiltration, reverse osmosis membranes, desalination and test kits. Its listed transfer fees run from ₹25,000 to about ₹13.5 lakh. Treated water should meet IS 10500:2012, under which arsenic should be below 0.01 mg/l.

In water treatment, some Indian public laboratories publish their technologies with a price. A manufacturer of purifiers, membranes or community treatment units can see what is on offer, what it costs to license and who has already taken a licence, before writing a single email.

That makes the sector a good place for an MSME to start licensing. It also makes the choice look easier than it is. A technology that removes arsenic from groundwater in one district may struggle with the iron and hardness in another. This post lists the main types of water technology on offer from public labs, the standard your product must meet, the checks to make, and a worked example.

What water technologies are on offer?

The Bhabha Atomic Research Centre (BARC) publishes a list of water technologies with prices. Its water technology page lists 18 technologies, each with a regular technology transfer fee. A selection, as listed in November 2026:

Technology What it does Listed transfer fee
Arsenic removal by physicochemical process Arsenic sorbed on an in-situ sorbent, then filtered through an ultrafiltration (UF) membrane ₹25,000
UF membrane device for iron removal Oxidises dissolved iron, then filters it out ₹25,000
Membrane assisted defluoridation Fluoride removal for drinking water ₹25,000
Solar photocatalysis domestic purifier Disinfection using sunlight ₹25,000
Online domestic UF purifier Polysulfone UF membrane for household use ₹1,40,000
Back-washable spiral UF Community and small industry purification, about 0.5 to 4 litres a minute ₹1,50,000
Nanocomposite UF membrane device Household removal of arsenic, iron and microbes ₹2,00,000
Composite polyamide RO membrane Brackish water desalination ₹2,50,000
High salt rejecting RO membrane Desalination ₹3,00,000
Fluoride detection kit Field test for groundwater ₹4,00,000
MED-TVC thermal desalination Multi effect distillation with thermal vapour compression ₹13,45,936

The individual pages for several of these, such as arsenic removal and iron removal, show a general licence with 0% royalty, and list the companies that already hold licences. A non-exclusive licence at a fixed fee is the usual model, so expect competitors with the same core process.

For BARC's application process, forms and what the licence looks like, see how to license a technology from BARC.

Other public sources include IITs, NITs and state universities with environmental engineering groups. They rarely publish prices, so the route is through the institute's technology transfer office, as described in licensing technology from Indian institutions.

Two ways to license a public water technology

Published, fixed-fee licence
Price known up front
Non-exclusive, others hold it too
Standard know-how package
vs
Negotiated institute licence
Terms agreed case by case
Exclusivity possible
More support, more time

Fixed fees suit a quick start; negotiation suits a product you want to own.

What standard must the product meet?

Treated drinking water in India is judged against IS 10500:2012, the Bureau of Indian Standards specification for drinking water. A licensed technology is only useful if it brings your water within these limits:

Parameter Acceptable limit Permissible limit without an alternate source
Arsenic 0.01 mg/l 0.05 mg/l
Fluoride 1.0 mg/l 1.5 mg/l
Nitrate 45 mg/l No relaxation
Total dissolved solids 500 mg/l 2,000 mg/l

BARC's arsenic page, for example, states that the process treats feed water from 500 ppb (0.5 mg/l) or more down to less than 10 ppb, which is the 0.01 mg/l acceptable limit. Ask for the test data behind every such claim, including the feed water used.

How do you choose the right technology?

Start from the water you will treat, not from the technology list.

  1. Test the raw water at your target sites for arsenic, fluoride, iron, hardness, TDS and microbial load. One contaminant rarely comes alone.
  2. Shortlist technologies whose stated feed range covers your worst site.
  3. Ask each licensor for performance data at a scale close to yours.
  4. Work out the running cost per thousand litres: power, chemicals, membrane replacement and sludge disposal.
  5. Check whether membranes and consumables are available in India, and from whom.
  6. Run a pilot unit on real water for at least a few weeks before scaling.

Step 4 deserves the most care. A cheap licence with a costly consumable is a poor deal over five years. Technology scouting covers how to build and screen a shortlist.

Choosing a water technology to license

1
Test your raw waterEvery contaminant, every site
2
Match the feed rangeWorst site first
3
Ask for scale dataClose to your unit size
4
Cost per 1,000 litresPower, chemicals, membranes, sludge
5
Pilot on real waterWeeks, not days

What should the pilot test?

A pilot is only useful if it measures what will decide the product's success. Run the unit on real water from your worst site and record:

Measurement How often Why
Target contaminant in and out Daily at first, then weekly Proves the unit meets IS 10500 on your water
Flow rate Daily Shows fouling and when cleaning is due
Pressure across the membrane Daily An early sign of clogging
Power and chemical use Weekly Feeds the running cost per 1,000 litres
Cleaning or backwash frequency Each event Drives service visits and customer effort
Sludge or reject volume Weekly Disposal cost and, for arsenic, safe handling

Have the treated water tested by an independent laboratory at least at the start and end of the pilot. Your own field kit is fine for daily checks, but a sales claim needs a test report you can show a buyer or a government tender.

Keep the pilot running long enough to see a full cleaning cycle and, if possible, a change in the raw water, such as before and after the monsoon. Groundwater chemistry can shift with the season, and a unit tuned to one season may struggle in the next.

What should the licence include?

A fixed-fee public licence comes with a standard package. Check that it gives you:

  • The process document, with operating ranges and the feed water limits it was tested on.
  • Membrane or sorbent specifications, and whether you may source them yourself.
  • Training for your production and service staff.
  • The right to use the licensor's test data in your sales material, and on what terms.
  • The territory and product types covered. One BARC fluoride listing, for instance, is available only outside Madhya Pradesh.

Know-how matters more than the patent in most water processes; see know-how licences in India.

A worked example

Illustration with invented figures. A Kolkata purifier maker plans a household arsenic and iron unit for West Bengal villages.

Item Amount
Licence fee for an arsenic removal process (published fee) ₹25,000
Licence fee for an iron removal device (published fee) ₹25,000
Pilot units and water testing over three months ₹3,00,000
Tooling and first production batch ₹12,00,000
Total before launch ₹15,50,000

The licence fees are ₹50,000 of ₹15.5 lakh, about 3%. The real investment is in testing and tooling, which is why the raw water survey and pilot deserve the most care.

Common mistakes

  • Choosing a technology before testing the water it must treat.
  • Assuming a non-exclusive licence gives you a protected market.
  • Ignoring membrane and consumable supply.
  • Quoting the licensor's performance figures without your own tests on local water.
  • Forgetting sludge disposal, which for arsenic needs particular care.

My view: in water, the published public-lab licence is a low-cost route into a proven process, and an MSME should look there first. I cannot say how these technologies perform on any particular water source, because the feed water varies so much; only a pilot on your own water answers that.

To compare water technologies beyond one laboratory's list, Zernyx Hub has mapped patents from universities across India, with AI business insight on each, including its commercial applications.

Common questions

Which water treatment technologies can a company license in India?

Public laboratories offer membrane filtration, arsenic, fluoride and iron removal, reverse osmosis membranes, thermal desalination, disinfection and field test kits. BARC's technology transfer site lists 18 water technologies with a regular transfer fee for each. Institutes such as IITs also license water technologies developed in their labs.

How much does a BARC water technology cost to license?

BARC's water technology page lists a regular transfer fee for each technology. In November 2026 these ranged from ₹25,000 for arsenic removal, defluoridation and iron removal processes to ₹13,45,936 for a multi effect distillation desalination technology. Several listings show 0% royalty.

What standard must a drinking water product meet?

Treated drinking water is judged against IS 10500:2012, the Bureau of Indian Standards drinking water specification. It sets an acceptable limit of 0.01 mg/l for arsenic and 1.0 mg/l for fluoride, with higher permissible limits only where no alternate source exists.

What should a manufacturer check before licensing a water technology?

The contaminant levels in the water it will treat, the scale the technology has run at, membrane and consumable supply, running cost per litre, maintenance needs, the testing behind the performance claim, and whether the licence covers your territory and product type.

Sahil Sheikh
About the author

Sahil Sheikh, Regd. Patent & Trademark Agent, cRTTP

Chief IP & Technology Officer, Zernyx Innovations

Connect on LinkedIn

Find a technology you can own.

Search patented technologies from Indian universities and labs, check their readiness and license the right one on Zernyx Hub.

Explore Zernyx Hub

Keep reading

Looking for something else?