Stamp duty on a technology license agreement in India: how states calculate it
Stamp duty on a license agreement in India: which state's law applies, fixed and value-based rates, Maharashtra and Tamil Nadu examples, e-stamping, penalties.
Part of the guide Licensing technology from Indian institutions: the complete guide for companies
Stamp duty on a technology license agreement in India is set by state stamp law, usually under its article for agreements. Some charge a fixed sum, such as ₹500 in Maharashtra's residuary clause; others charge a percentage of the agreed amount. Stamp it before or at signing. Unstamped, it is inadmissible in evidence until duty and a penalty are paid.
Stamp duty is the line item most licence negotiations forget until the signing day. It is rarely large on a technology licence, but getting it wrong has a cost that shows up later, when you need to rely on the agreement in a dispute or a due diligence.
This post explains which law applies, how states calculate duty, what we could and could not verify for individual states, and the practical steps before you sign. It is general information. Stamp schedules change often, so confirm the current rate for your state before execution.
Which law decides the stamp duty?
The Indian Stamp Act, 1899 is the base law. States either apply it with their own schedule of rates or have their own stamp acts, such as the Maharashtra Stamp Act, 1958 and the Karnataka Stamp Act, 1957. In practice, the rate for a licence agreement comes from the schedule of the state that charges the duty.
Four sections of the 1899 Act do most of the work:
| Section | What it says | Why it matters for a licence |
|---|---|---|
| 3 | Instruments listed in Schedule I are chargeable with duty | A licence is chargeable if an article covers it |
| 17 | Instruments executed in India must be stamped before or at the time of execution | Buy the stamp before you sign |
| 18(1) | An instrument executed out of India may be stamped within three months after it is first received in India | Licences signed abroad by a foreign party |
| 35 | An unstamped instrument is not admitted in evidence; it can be admitted on paying duty plus a penalty | The real cost of skipping duty |
The penalty in section 35 is five rupees or ten times the deficient duty, whichever is more. On a fixed ₹500 duty that is ₹5,000. On a value-based duty it can be much larger. Section 33 also lets a court or other person receiving evidence impound an instrument that is not duly stamped.
How do states calculate duty on a licence?
A technology licence is not usually named in any stamp schedule. It falls under the article for "agreements", and states write that article in one of two ways:
- A fixed duty for any agreement "not otherwise provided for".
- A duty based on the amount, for agreements that create a right or obligation with a monetary value.
Some states have both, and then the question is which entry fits your document. A licence with a large upfront fee and royalty looks like an agreement with monetary value. A licence for a nominal fee may sit in the fixed residuary clause. This classification is where advice earns its fee.
Two ways a state can charge a licence
Which entry applies is a classification question for your state.
The old central entry, Article 5(c) of Schedule I, charged "Eight annas" on agreements not otherwise provided for. Treat it as history: states apply their own rates.
What do individual states charge?
We checked official and gazette sources for a few states. Where we could not open an official source, we say so.
| State | What we found | Source and status |
|---|---|---|
| Maharashtra | Article 5(h)(B), agreements not otherwise provided for: ₹500, raised from ₹100 | Maharashtra Ordinance XII of 2024, dated 14 October 2024 |
| Maharashtra | Article 5(h)(A)(iv), agreements creating a right or obligation with monetary value not covered elsewhere: 0.1% of the amount (minimum ₹100) up to ₹10 lakh, 0.2% above | From a published copy of the schedule; confirm with the IGR before relying on it |
| Tamil Nadu | Clause (j) of the agreement article: ₹200, raised from ₹20 | Indian Stamp (Tamil Nadu Amendment) Act, 2023 (Act 13 of 2024), in force from its gazette publication on 3 May 2024 |
| Karnataka | Amended by the Karnataka Stamp (Amendment) Act, 2023 | We could not open the official schedule; check the current Article 5 |
| Delhi | Applies the Indian Stamp Act with Delhi's rates | We could not confirm the Article 5 rate on an official page |
Maharashtra's schedule also has a separate entry for assignment of copyright. Patents are not named. That gap is why the classification question above matters so much in Maharashtra.
How a state charges duty on a licence
A worked example
Illustration (invented figures, Maharashtra rates as read above). An MSME in Pune signs a non-exclusive licence with a university for a ₹40 lakh upfront fee plus royalty.
| Reading of the schedule | Calculation | Duty |
|---|---|---|
| Residuary clause, Article 5(h)(B) | Fixed | ₹500 |
| Value-based clause, Article 5(h)(A)(iv), if 0.2% applies to the whole amount | 0.2% of ₹40 lakh | ₹8,000 |
The gap between ₹500 and ₹8,000 is small next to a ₹40 lakh deal, and that is the point. Paying the higher figure when the classification is unclear costs little. Under-paying costs more: Maharashtra's own Stamp Act charges a penalty on deficient duty under section 34, which in the consolidated text we read runs at 2% of the deficiency a month, capped at four times the deficiency, so up to ₹30,000 on the ₹7,500 gap. The central Act's ten-times rule would make it ₹75,000. Check the current Maharashtra text, because penalty provisions have been amended. Running royalty, which has no fixed amount at signing, makes the value-based calculation harder still, and I have not found an official rule that settles how it is counted. Ask your advocate or the stamp office.
Who pays, and how?
Read the "costs" or "stamp duty" clause in the draft. If it is silent on who bears the duty, add a line, so the question is settled before the signing day.
E-stamping is the usual method. StockHolding (SHCIL), the Central Record Keeping Agency authorised by the Ministry of Finance, runs e-stamping in many states and union territories; its own material puts the figure at 23. You can buy a certificate at an authorised collection centre or online at shcilestamp.com, and print it or have it delivered. In states without e-stamping, use the state's own system or franking.
Practical steps:
- Fix the place of signing early. If the university signs in one state and you sign in another, decide which state's duty you will pay and record it.
- Buy the e-stamp in the name of the party paying, with the other party and the document described.
- Print the agreement on, or attach it to, the stamp certificate as the state requires.
- Sign on or after the stamp date, never before.
- For a foreign party signing abroad, stamp within three months of the document reaching India.
Stamp duty and the Patent Office
A patent licence must be in writing, with all terms in one document and duly executed, under section 68 of the Patents Act. Registration on Form 16 under section 69 is what records it, and Rule 91 asks for the document to be presented with the application. Neither rule mentions stamping, and we found no Patent Office notice requiring it. My advice is to stamp anyway. A registered but unstamped licence still cannot be relied on in evidence until duty and penalty are paid. Patent licensing in India covers the Form 16 steps.
An assignment of a patent is a different instrument and may be charged differently, possibly as a conveyance in some states. We could not confirm how any state classifies it, so treat patent assignment as its own question.
Common mistakes
- Signing first and stamping later. Section 17 asks for stamping before or at execution.
- Assuming the fixed rate applies without checking for a value-based entry.
- Using an old stamp paper bought for another deal, or in another party's name.
- Forgetting the three-month window when a foreign licensee signs abroad.
- Leaving the agreement silent on who pays the duty.
For the clauses that sit around the stamp, see technology license agreement clauses. If you are still choosing a technology to license, Zernyx Hub has mapped patents from universities across India, with AI business insight on each.
Common questions
Which state's stamp duty applies to a licence agreement?
Section 17 of the Indian Stamp Act, 1899 requires an instrument executed in India to be stamped before or at the time of execution, so the state where it is signed is the usual starting point. An agreement signed outside India may be stamped within three months of first being received in India under section 18. When parties sign in different states, take advice before signing.
What happens if a licence agreement is not stamped?
Under section 35 of the Indian Stamp Act, an unstamped or under-stamped instrument is not admitted in evidence. It can be admitted on payment of the duty plus a penalty of five rupees or ten times the deficient duty, whichever is more. Officers who receive evidence can also impound it under section 33. State laws have their own versions of these rules.
Is stamp duty on a licence agreement fixed or a percentage?
It depends on the state and the article that applies. Maharashtra's residuary clause for agreements is a fixed ₹500 since October 2024, but its schedule also has a value-based entry for agreements creating a right with monetary value. Whether a licence falls under the fixed or the value-based entry is a classification question to settle before signing.
Does IP India require a stamped licence for Form 16?
Rules 90 and 91 of the Patents Rules ask for the application on Form 16 with the document, and do not mention stamping. Even so, the register entry is only as strong as the document behind it, and an unstamped document cannot be relied on in evidence until duty and penalty are paid. Stamp it first.