GuideLicensing

How to license a materials technology from ARCI

ARCI technology transfer for manufacturers: what ARCI offers, its exclusive and non-exclusive transfer modes, how to read its readiness levels and what to ask.

By Sahil Sheikh, Regd. Patent & Trademark Agent, cRTTP 6 min read

Part of the guide Licensing technology from Indian institutions: the complete guide for companies

Short answer

ARCI, the International Advanced Research Centre for Powder Metallurgy and New Materials in Hyderabad, is an autonomous R&D centre of the Department of Science and Technology. It transfers materials technologies to Indian industry on exclusive, region-exclusive or non-exclusive terms, chosen by market size. ARCI reports transferring more than 30 technologies to over 45 receivers.

ARCI's mandate includes demonstrating technologies at prototype or pilot scale and transferring them to Indian industry, so many of its technologies come with equipment designs, process windows and production experience.

For a manufacturer in coatings, ceramics, powder metallurgy or battery materials, ARCI is worth checking early. This guide explains what ARCI is, what it offers, how its transfers are structured, what to ask for and how a typical deal might look.

What is ARCI?

According to ARCI's own description, the International Advanced Research Centre for Powder Metallurgy and New Materials is an autonomous research and development centre of the Department of Science and Technology, Government of India. It was set up in 1997, has its main campus in Hyderabad and operates in Chennai and Gurgaon. Its work runs through 11 research centres.

Point What ARCI states
Status Autonomous R&D centre of DST
Mandate High-performance materials and processes for niche markets; demonstration at prototype or pilot scale; transfer to Indian industry
Transfer modes Exclusive and non-exclusive, chosen by perceived market size
Record 32 technologies to 46 receivers on its about page; 33 to 48 on its list of transfers
Hand-over A know-how document to each receiver

The two counts differ slightly between pages, which is normal for a list updated at different times. The point is the scale: dozens of transfers to Indian companies.

What does ARCI offer?

ARCI's licensing opportunities page lists technologies with a readiness level. Examples, as listed in November 2026:

Technology Listed level
Super-hydrophobic self-cleaning coating for solar panels 9, technology transfer initiated
Solar receiver tube for low and medium temperature use 9
Platinum-based electrocatalysts for fuel cells 9
Lead-free copper alloys for bimetallic bearings 9
Detonation spray coating 8
Micro arc oxidation coating 8
LFP and LTO electrode materials for EV batteries 7
Cathodic arc PVD wear-resistant coatings 7
PEM fuel cell membrane electrode assembly 6
Fe-P soft magnetic material for alternators 5

The levels on this page are ARCI's own IPDI scale, not the national TRL scale. Level 9 means transfer has started, and level 8 means ARCI is reassessing feasibility across IP, competition, technology and commercial factors. Treat a lower level as a sign that you will carry more development cost.

How does an ARCI transfer work?

ARCI's list of transferred technologies shows the pattern:

Technology How it was transferred
ESC equipment To 8 companies, non-exclusive
Detonation spray coating To 4 companies, region-exclusive
Micro arc oxidation To 3 companies, region-exclusive
LFP cathode materials To two companies, non-exclusive within India; a separate listing shows exclusive rights for territories outside India

Region-exclusive licensing is common for coating services, where customers are local and several licensees can serve different regions without competing directly. For a product sold nationally, such as battery materials, expect non-exclusive terms within India.

ARCI does not publish licence fees or royalty rates on these pages. Expect them to be negotiated per technology.

Licensing a technology from ARCI

1
Find the technologyLicensing page, papers, patents
2
Contact ARCIAsk for the transfer terms
3
Visit and see it runPilot line or demonstration
4
Agree territory and modeExclusive, region or non-exclusive
5
Sign and receive know-howDocument, training, support

What should you ask for?

Because ARCI technologies are often closer to production, the know-how document carries most of the value. Before signing, ask for:

  • The process parameters and their tolerances.
  • Equipment specifications, and whether ARCI designed or modified any equipment you must buy.
  • Raw material specifications, especially powders, where particle size and purity change results.
  • Quality tests and acceptance criteria for the product.
  • Data from the largest run ARCI has made.
  • Training days for your operators, and the support period after start-up.
  • Your territory and exclusivity, in writing.

For how a know-how licence differs from a patent licence, see know-how licences in India. If the technology is licensed exclusively, the obligations that come with that are covered in exclusive licences.

What should you ask in the first meeting?

A first meeting goes further when you arrive with specific questions. Useful ones for an ARCI technology:

  1. Is the technology available in my region and field, and on what mode: exclusive, region-exclusive or non-exclusive?
  2. How many companies already hold a licence, and where?
  3. What is the largest scale ARCI has run, and can I see that run or its data?
  4. Which equipment is standard and which is special, and who supplies the special items?
  5. How many days of training and start-up support are included?
  6. What fee structure applies: a one-time fee, a royalty or both?
  7. Who owns improvements I make, and may ARCI license them to others?

The answers to questions 2 and 7 shape your competitive position more than the fee does. If three licensees already serve your region, the business case changes.

What happens after you sign?

The transfer is not finished when the agreement is signed. A sound plan covers:

  • Receipt of the know-how document, checked against the agreed list of contents.
  • Operator training at ARCI or at your site.
  • Installation and commissioning of equipment, with ARCI's advice where agreed.
  • Trial runs until your output meets the agreed quality tests.
  • A written record that the transfer is complete, so both sides know when support ends.

Agree in writing what "complete" means. A coating that passes ARCI's tests on ARCI's equipment may need more trials on yours.

A worked example

Illustration with invented figures and terms. A Pune coating shop licenses a thermal spray coating process on a region-exclusive basis for western India.

Item Amount
Technology transfer fee ₹15,00,000
Royalty 3% of coating service revenue
Year one coating revenue ₹1,20,00,000
Royalty in year one ₹3,60,000
Equipment and booth ₹80,00,000

Year one cash out in this illustration

₹98.6 lakh in year one
81%15%
Equipment and booth₹80 lakh81%
Transfer fee₹15 lakh15%
Royalty3% of ₹1.2 crore4%
Invented figures for illustration only.

Equipment is about 81% of the first-year outlay. As with most process licences, the deal stands or falls on whether the equipment and process deliver the coating quality customers will pay for, which is why the plant visit matters more than the fee.

Common mistakes

  • Reading ARCI's IPDI level as a national TRL.
  • Assuming exclusivity without asking. Many ARCI transfers are non-exclusive.
  • Skipping a visit to see the process run.
  • Buying equipment before the transfer agreement fixes who supports start-up.
  • Not checking powder and raw material sources in India.

My view: ARCI's mix of region-exclusive and non-exclusive transfers is a sensible model for materials processes, and a manufacturer should ask early which mode applies. I cannot give typical ARCI fees, because the centre does not publish them; ask for the terms of the specific technology.

For more on dealing with public research bodies, see licensing technology from Indian institutions and how to license a technology from ICT Mumbai. To compare materials technologies more widely, Zernyx Hub has mapped patents from universities across India, with AI business insight on each.

Common questions

What kind of technologies does ARCI license?

Materials and process technologies: thermal spray and other coatings, ceramic products, powder metallurgy parts, battery electrode materials, fuel cell components, solar thermal and magnetic materials. Its listings include detonation spray coating, micro arc oxidation, self-cleaning coatings for solar panels and LFP and LTO electrode materials.

Does ARCI give exclusive licences?

Sometimes. ARCI says it chooses exclusive or non-exclusive transfer depending on the perceived market size of the products or services. Its records show both, plus region-exclusive transfers, such as detonation spray coating to four companies on a region-exclusive basis.

What does an ARCI licensee receive?

ARCI's list of transferred technologies says a know-how document has been handed over to each receiver. The rest of the package, such as training, support and equipment advice, is agreed in the transfer agreement for each technology.

What do ARCI's IPDI levels mean?

ARCI's licensing page tags each technology with an IPDI level. Level 9 is described as 'Initiated Technology Transfer', and level 8 as 'Reassessing feasibility (IP, Competition, Technology, Commercial)'. Lower levels mean more development is left for the licensee.

Sahil Sheikh
About the author

Sahil Sheikh, Regd. Patent & Trademark Agent, cRTTP

Chief IP & Technology Officer, Zernyx Innovations

Connect on LinkedIn

Find a technology you can own.

Search patented technologies from Indian universities and labs, check their readiness and license the right one on Zernyx Hub.

Explore Zernyx Hub

Keep reading

Looking for something else?