TRL for NIDHI PRAYAS: the prototype stage the grant expects
What TRL NIDHI PRAYAS funds: DST's PRAYAS 2.0 prototype grant of up to ₹20 lakh, or ₹40 lakh at advance centres, who can apply and what to show.
Part of the guide TRL levels explained: what TRL 1 to 9 really mean, and how to place your technology
NIDHI PRAYAS is a Department of Science and Technology grant for turning an idea into a working prototype. Under the 2026 PRAYAS 2.0 guidelines, a PRAYAS Centre gives up to ₹20 lakh per innovator. An Advance PRAYAS Centre gives up to ₹40 lakh. Projects run 15 months. The guidelines frame progress from about TRL 3 to TRL 6.
NIDHI PRAYAS sits at a precise point in India's innovation funding chain: after an idea has some proof behind it, and before there is a product anyone can buy. Getting that position right on your application comes first, because the scheme is written for one job: building a working prototype.
This post explains what NIDHI PRAYAS is, how much it gives under the current PRAYAS 2.0 guidelines, who applies and through whom, the readiness band it funds expressed in TRLs, the evidence an applicant should bring, and what it will not pay for.
What is NIDHI PRAYAS?
NIDHI, the National Initiative for Developing and Harnessing Innovations, is an umbrella programme of the Technology Translation and Innovation (TTI) Division of the Department of Science and Technology (DST). Its official site lists several components, from incubators to seed support. PRAYAS stands for Promoting and Accelerating Young and Aspiring innovators and Startups, and it is the component for taking an idea to a prototype.
The scheme is now in its second version. DST's PRAYAS 2.0 page names the Society for Innovation and Entrepreneurship (SINE) at IIT Bombay as the Programme Management Unit, and the PRAYAS 2.0 guidelines, dated March 2026, set the current rules. Selected innovators are called PRAYASEEs. Besides money, they get access to fabrication labs (NIDHI Maker Bhavan), technical and business mentoring, IP and legal help, and introductions to industry and investors.
How much does NIDHI PRAYAS give?
PRAYAS 2.0 works through two levels of centre, set out in Section 5.1 of the guidelines.
| PRAYAS Centre (PC, Level 1) | Advance PRAYAS Centre (APC, Level 2) | |
|---|---|---|
| Grant per innovator | Up to ₹20 lakh | Up to ₹40 lakh |
| Meant for | Technology-based innovations | Deep-tech innovations and advanced prototypes |
| Project term | 15 months | 15 months |
| Innovators supported | About ten a year per centre | About ten a year per centre |
| Moving between them | May later apply to an APC for the balance | Cannot then receive PC funding |
A few rules sit around these numbers. Total support for one innovation cannot exceed ₹40 lakh, and that includes any grant received under PRAYAS 1.0, which offered a maximum of ₹10 lakh per innovator according to DST's earlier PRAYAS page. An applicant whose cumulative government grants exceed ₹40 lakh is not eligible. The 15-month term can be extended by up to six months with the approval of the PRAYAS Local Monitoring Committee (PLMC), which also fixes the final grant amount.
PRAYAS Centre or Advance PRAYAS Centre?
Total support for one innovation is capped at ₹40 lakh, including PRAYAS 1.0.
Who can apply, and through whom?
Section 5.4.1 sets out eligibility. An individual can apply without having a startup, if aged at least 18 on the date of application, with proof of age and Indian citizenship. A startup can apply if it was incorporated in India not more than five years before the application date, at least 51% of its equity is held by Indian citizens, and its turnover has not exceeded ₹1 crore in any financial year since incorporation. Individual grantees are encouraged to incorporate as a DPIIT-registered startup within six to eight months.
Three further conditions catch people out. You may use NIDHI PRAYAS 2.0 only once. You cannot hold parallel support under NIDHI-EIR for the same or a similar idea. And full-time students and employees need a no objection certificate that permits the project and confirms the IP vests with the innovator or startup. For a faculty member or PhD scholar, that last condition means settling the IP question with your institution before you apply.
You do not apply to DST directly. You apply to a designated PRAYAS Centre or Advance PRAYAS Centre using the common application template on the NIDHI PRAYAS portal. The centre screens the idea, and its PLMC, which includes technical experts, investors, industry representatives and entrepreneurs, recommends approval, rejection or a reduced amount. Its decision is final. If you are selected, the centre signs a grant agreement with you, and funds are released in tranches against milestones. Two rules decide where you can apply. If an Advance PRAYAS Centre does not approve your proposal, a PRAYAS Centre may still consider a later application, subject to its own PLMC's assessment. But once you receive funding at an Advance PRAYAS Centre, you are not eligible for a PRAYAS 2.0 grant from any PRAYAS Centre, and innovators who were funded under PRAYAS 1.0 may apply under PRAYAS 2.0 only at an Advance PRAYAS Centre.
How a NIDHI PRAYAS application moves
Calls open centre by centre. The programme's page for innovators and DST's PRAYAS 2.0 page are the places to start; the older list of centres on the programme site is for PRAYAS 1.0. Dates vary, so check the centre you plan to approach.
What TRL does NIDHI PRAYAS fund?
The guidelines do not use a single TRL figure, but they mention TRLs in four places, and together they draw a clear band:
- Section 4.0, expected outcomes: "Technologies advanced beyond TRL 4 towards TRL 7".
- Section 5.4.2, advance centre projects: measurable TRL milestones, with the example of moving from TRL 3 or 4 to TRL 6.
- Section 9.0, incubator eligibility: progression of ideas "from TRL-3 to TRL-6".
- Section 11.0, evaluation of centres: "Technologies advanced beyond TRL 4 towards TRL 6".
The expected outcome for each PRAYASEE is a working prototype by the end of the cycle. At the top end there is a hard stop: under item 12 of Section 5.4.1, proposals for products that have crossed the MVP level are not eligible.
Put in the language of India's national framework, NTRAF, the scheme expects you to arrive with an experimental proof of concept (TRL 3) or a component or system validated in the lab (TRL 4). You then pass through a lab-scale system validated in a relevant environment (TRL 5) and leave with a prototype demonstrated in a relevant environment (TRL 6). The Section 4.0 reference to TRL 7 reads as an aspiration, since the other three references stop at TRL 6.
Where NIDHI PRAYAS sits on the TRL scale
My advice is to apply when you have TRL 3 data in hand and a credible plan to reach TRL 5 or 6 within 15 months. A concept on paper (TRL 2) gives the committee nothing to judge. A team close to an MVP has probably outgrown the scheme.
What evidence should an applicant show?
The guidelines do not publish an evidence checklist, so this is a practical reading of what the eligibility and outcome rules imply.
| What the committee needs to see | Evidence to bring |
|---|---|
| Proof of concept exists (TRL 3) | Dated lab notebook pages, test data or simulation results showing the key function works |
| What the prototype must do | Three to five performance targets, with numbers |
| A path to TRL 6 in 15 months | Milestones tied to each tranche, each with a measurable output |
| You are below the MVP level | A plain statement of what exists today and what does not |
| The IP is yours to use | Ownership or licence evidence, the NOC if you are a student or employee, a prior art search |
| Someone will use it | A first commercialisation roadmap: user, market, next source of funding |
Our guide on how to prove your TRL shows how to build an evidence pack, and moving from TRL 3 to TRL 4 covers the first jump most PRAYAS projects must make. Since patent filing, including PCT, is an allowed cost, plan the filing alongside your milestones; our guide on low-cost patent filing for startups explains the cheaper route once you have DPIIT recognition.
A worked budget: how ₹20 lakh might be split
Section 5.4.1 lists what the grant may be spent on. The split below is an illustration with round, invented numbers for a hardware prototype at a PRAYAS Centre. The heads and caps come from the guidelines; your PLMC will set the actual figures.
| Head allowed by the guidelines | Illustration | Rule |
|---|---|---|
| Fabrication or synthesis of working models | ₹6.0 lakh | |
| Raw materials, consumables and spares | ₹3.0 lakh | |
| Outsourced R&D, design, testing and expert costs | ₹3.0 lakh | |
| Field tests, validation, pilot runs | ₹2.0 lakh | |
| Patent filing | ₹1.5 lakh | PCT allowed |
| Business travel and event fees | ₹1.0 lakh | Capped at 10% |
| Sustenance or manpower | ₹3.0 lakh | Up to 20% of the grant, if the PLMC recommends it |
| Contingency | ₹0.5 lakh | |
| Total | ₹20.0 lakh |
More than half of this illustration goes on making and testing things, which matches what the scheme is for.
What NIDHI PRAYAS does not fund
The guidelines exclude whole categories of project: pure software development, e-commerce, service solutions and app-based solutions. The programme's innovator page adds that software forming part of a hardware product, such as an IoT device, can be considered. Research or student internships in academic and R&D institutions are also excluded, as is parallel support under NIDHI-EIR, and so is any product past the MVP level.
Within an approved project, the grant cannot be used to repay existing loans, pay incubator usage charges, rent your own accommodation, build infrastructure such as sheds, or act as a stop-gap while you pursue other professional work. On the other side of the table, centres may not take equity in exchange for the grant, and hosts shall not demand equity or IP ownership as a condition of support.
If your work is in biotechnology, compare BIRAC's BIG grant, which funds the step from idea to proof of concept; our guide to BIRAC BIG and TRL explains how it maps to readiness levels.
Check your starting TRL before you apply
The committee will judge your stage from your evidence, so test it first. In TRL Pro you enter your technology and get back a readiness level from TRL 1 to 9, assessed with Zernyx's own copyrighted framework (ZTRAF) across more than 60 technology domains and subdomains. Use the result to state your starting TRL and set milestones that end at a working prototype.
Common questions
How much is the NIDHI PRAYAS grant?
Under the PRAYAS 2.0 guidelines of March 2026, up to ₹20 lakh per innovator at a PRAYAS Centre and up to ₹40 lakh at an Advance PRAYAS Centre. Total support for one innovation, including any PRAYAS 1.0 grant, cannot exceed ₹40 lakh. PRAYAS 1.0 offered a maximum of ₹10 lakh.
Can a student or faculty member apply for NIDHI PRAYAS?
Yes. An individual aged 18 or more can apply without a startup, with proof of age and Indian citizenship. Anyone employed or enrolled full-time in an academic or R&D institution needs a no objection certificate that permits the project and confirms the IP vests with the innovator or startup.
Does NIDHI PRAYAS fund software or app ideas?
The guidelines exclude pure software development, e-commerce, service solutions and app-based solutions. The programme's innovator page says software that forms part of a hardware product, such as IoT, can be considered.
What TRL should I be at to apply for NIDHI PRAYAS?
The guidelines do not set one entry TRL. They give TRL 3 to 4 at entry and TRL 6 at exit as an example for advance centres, and exclude products that have crossed the MVP level. In practice, apply with proof-of-concept data (TRL 3) and a plan to reach TRL 5 or 6.
Who owns the IP created with a NIDHI PRAYAS grant?
The guidelines say IP vests with the innovator or startup unless a separate contract says otherwise, and host centres shall not demand equity or IP ownership as a condition of support.