# TRL for chemical processes and new materials: what each level looks like, from flask to plant

URL: https://zernyxhub.com/blog/trl-chemical-process
Author: Dr. Abhay Tharmatt, Research Scientist, R&D, Zernyx Innovations
Published: 2026-10-26
Category: Technology readiness

> TRL for chemical processes and materials: what TRL 1 to 9 look like from lab synthesis to miniplant, pilot and plant, and the evidence each level needs.

**Short answer:** For a chemical process or a new material, TRL 1 to 3 cover the idea and a lab proof that the chemistry works. TRL 4 and 5 are process development at lab and miniplant scale, with the steps validated and then run under realistic conditions. TRL 6 is a pilot plant in a relevant environment, TRL 7 a demonstration and full-scale engineering, TRL 8 commissioning of the first plant, and TRL 9 routine production.

The standard TRL scale was written for hardware: components, prototypes, systems. A chemist or materials scientist reading it often struggles. What is a "prototype" when your technology is a catalyst, a solvent-free route to an intermediate, or a new polymer grade? Where does a 10-litre reactor sit? Is a pilot plant TRL 6 or 7?

This guide translates the nine levels into the language of chemical process development, from the first reaction in a flask to a plant in routine production. It is written for researchers and startups in chemicals, materials, catalysis, polymers and process engineering who need to place their technology honestly for a grant, an investor or a licensee.

## The short answer

For a chemical process or new material, the levels follow the scale and integration of the process:

- **TRL 1 to 3:** the idea, the concept and a lab proof that the chemistry works.
- **TRL 4 to 5:** process development, first with the key steps validated in the lab, then run under realistic conditions, often in a miniplant.
- **TRL 6:** a pilot plant in a relevant environment.
- **TRL 7:** demonstration and full-scale engineering.
- **TRL 8:** the first commercial plant commissioned and qualified.
- **TRL 9:** routine production, proven over the full range of conditions.

The rule that matters most: move to the next level only after the current one is clearly achieved.

## Two scales worth knowing

**India's NTRAF.** The National Technology Readiness Assessment Framework, published by the Office of the Principal Scientific Adviser, gives generic definitions for TRL 1 to 9. TRL 4 is component or system validation in the lab. TRL 5 is laboratory-scale validation of a similar system in a relevant environment. TRL 6 is an engineering or pilot-scale prototype demonstrated in a relevant environment. TRL 7 is a full-scale system prototype in an operational environment. NTRAF has no separate annex for chemicals or materials, but its manufacturing criteria apply directly to process work. For example, at TRL 4 key manufacturing processes are identified and assessed in the lab, at TRL 6 critical manufacturing processes are prototyped, and at TRL 8 manufacturing processes show acceptable yield and producibility.

**A chemical-industry interpretation.** A 2019 paper in *Industrial & Engineering Chemistry Research* by Buchner and colleagues proposed TRL names specific to the chemical industry: idea, concept, proof of concept, preliminary process development, detailed process development, pilot trials, demonstration and full-scale engineering, commissioning, and production. These names are a useful way to read the generic scale for process work.

Use NTRAF when you report to an Indian funder, and name the scale in every proposal. Our post on [TRL levels explained](https://zernyxhub.com/blog/trl-levels-explained) covers NTRAF in more detail.

## The nine levels for a chemical process

**TRL for a chemical process, in short**
- TRL 1: Idea: a reaction or material is proposed
- TRL 2: Concept: route and use case worked out
- TRL 3: Proof of concept in the lab
- TRL 4: Key process steps validated in the lab
- TRL 5: Process run under realistic conditions
- TRL 6: Pilot plant in a relevant environment
- TRL 7: Demonstration, full-scale engineering
- TRL 8: First plant commissioned and qualified
- TRL 9: Routine production over full conditions
(Where most stall: TRL 4 to TRL 6)

**TRL 1, idea.** A new reaction, catalyst or material is proposed, based on literature or a first observation. There is no process yet.

**TRL 2, concept.** You have worked out a route on paper: reagents, likely conditions, the product's target properties and the application. A first look at raw material availability and cost belongs here.

**TRL 3, proof of concept.** The reaction gives the target product reproducibly at lab scale, and you have characterisation data to prove what you made. For a material, you have measured the key property that makes it useful.

**TRL 4, preliminary process development.** The key steps, such as reaction, work-up, separation and purification, are validated together in the lab. You know yields, purity, main by-products and the parameters that matter, such as temperature, pressure, residence time and catalyst loading. A first mass balance and a rough cost estimate exist.

**TRL 5, detailed process development.** The process runs under conditions close to the real ones: technical-grade raw materials instead of reagent-grade, realistic concentrations, and recycle of solvents or catalyst where the final process will recycle them. Many teams use a miniplant, a small continuous or semi-continuous unit, to run for long enough to see impurities build up. Process safety data and a fuller cost model come in at this stage.

**TRL 6, pilot trials.** A pilot plant produces the product reliably in a relevant environment, often in quantities a customer can test. Some multi-step processes run each step as a separate unit at this stage. Equipment choices are made with scale-up in mind.

**TRL 7, demonstration and full-scale engineering.** The units are integrated into a continuous flow-through process, or a demonstration unit runs at a scale close to commercial. Start-up, shutdown and upset procedures are written, and detailed engineering for the commercial plant is done.

**TRL 8, commissioning.** The first commercial plant is built, commissioned and qualified. Product meets specification, and yields and producibility are at acceptable levels.

**TRL 9, production.** The plant runs routinely over the full range of expected conditions, and operating experience feeds improvements.

## The evidence a reviewer expects at each stage

A TRL claim is only as good as the data behind it. For chemical work, reviewers and licensees look for:

- **At TRL 3:** reproducible lab results across several batches, with spectra, chromatograms or property measurements, not one good run.
- **At TRL 4:** a validated sequence of steps, a mass balance, and the key parameters with their ranges.
- **At TRL 5:** results with technical-grade inputs, recycle data, impurity profiles over time, and process safety information.
- **At TRL 6:** pilot runs with mass and energy balances, product samples tested against customer specifications, and an updated cost of production.

Our guide on [how to prove your TRL](https://zernyxhub.com/blog/trl-evidence) gives the general evidence rules, and our post on [moving from TRL 4 to TRL 6](https://zernyxhub.com/blog/trl-4-to-trl-6) covers the validation plan between those levels.

## Where chemical scale-up breaks

Problems often appear at the step changes between scales, which is why each level should be clearly achieved before you move on.

**What changes between lab and pilot scale**
Lab flask:
- Heat removed easily
- Mixing is near perfect
- Fresh reagent-grade inputs
- Runs for hours
Pilot and plant:
- Heat removal can limit rate
- Mixing and mass transfer matter
- Technical-grade, recycled inputs
- Runs for weeks, impurities build
Test the hard parts at each scale, not just the yield.

Common causes of trouble:

- **Heat and mass transfer.** Surface area does not scale with volume. An exotherm that was easy to control in a flask can limit the rate in a large reactor.
- **Recycle streams.** Recycling solvents or catalyst can build up trace impurities that never showed in single-pass lab work.
- **Raw material quality.** Technical-grade feedstock can behave differently from the reagent-grade material used in the lab.
- **Solids handling.** Filtration, drying and conveying of solids often cause more problems at scale than the reaction itself.
- **Materials consistency.** For a new material, batch-to-batch consistency matters as much as the best property you achieved once.

Some teams are tempted to jump from a pilot plant straight to a commercial plant when the economics look good. It can work, but it moves the risk to a larger, more expensive plant. Plan what happens if the first plant does not perform, and how you would find the cause.

## TRL and manufacturing readiness

For chemicals and materials, TRL and manufacturing readiness move together. A process at TRL 6 with no idea of where to source raw materials at scale, or how to meet a customer's specification consistently, is a weak TRL 6. Our post on [MRL vs TRL](https://zernyxhub.com/blog/mrl-vs-trl) explains the manufacturing readiness levels and when to use them alongside TRL.

## Common mistakes

- **Calling a single good batch TRL 4.** One run is a result, not a validated process.
- **Ignoring work-up and purification.** The reaction may be at TRL 4 while separation is still at TRL 3. The process is only as ready as its least ready step.
- **Using reagent-grade inputs until the pilot.** Switch to technical-grade earlier, at TRL 5, to find problems while they are cheap.
- **No cost model.** Licensees and investors ask for cost of production at TRL 4 to 6. Keep a simple model and update it at each stage.
- **Not naming the scale.** Say whether you used NTRAF or another scale.

## Placing your own process

If you are unsure where your process sits, assess each step separately, then take the lowest level as the process TRL. [TRL Pro](https://app.zernyxhub.com/trl-calculator) gives you a structured TRL 1 to 9 assessment using Zernyx's own copyrighted framework (ZTRAF), which covers more than 60 technology domains and subdomains, so you get a level you can explain to a reviewer, a funder or a licensee.

## FAQ

**What TRL is a reaction that works in a round-bottom flask?**
Usually TRL 3, if it is reproducible and characterised. It moves to TRL 4 when the key process steps are validated together in the lab.

**Is a pilot plant TRL 6 or TRL 7?**
Usually TRL 6. TRL 7 is a demonstration with integrated units and full-scale engineering.

**Can I skip the pilot plant?**
It is possible but risky. Scale-up problems often appear at the step changes, and skipping a level moves the cost and risk to a larger plant.

**Which TRL scale should I use in India?**
NTRAF for Indian funders, with a chemical-industry reading of each level. Always name the scale you used.

---

Published by Zernyx Hub. More: https://zernyxhub.com/llms.txt
