# Writing a licensing pitch email to industry: templates for faculty

URL: https://zernyxhub.com/blog/licensing-pitch-email-faculty
Author: Dr. Deepak Chitkara, Founder, Zernyx Innovations
Published: 2026-11-03
Category: Technology transfer

> Technology pitch email templates for Indian faculty: a first email, a follow-up and a reply to interest, with subject lines and what to leave out of each.

**Short answer:** A technology pitch email from faculty to industry should be under 150 words: name the reader's problem, give one result with a number, state the patent status and the stage, attach a non-confidential summary and ask for a 20-minute call. Send nothing enabling before the patent application is filed, and copy your technology transfer office.

Most faculty pitch emails fail in the first two lines. They open with the lab, the paper or the professor's credentials, and the reader in a company has deleted them before reaching the part that matters to her business. A good licensing email is short, specific and about the reader.

This guide gives three templates you can adapt: the first email, the follow-up and the reply when a company shows interest. It also covers what must stay out of the email, and where your technology transfer office (TTO) comes in.

## Before you write: three things to have ready

1. The patent application filed. Under the Patents Act, the application is made on Form 1 with a provisional or complete specification on Form 2. Until it is filed, keep the invention out of emails. Our post on [publishing before filing](https://zernyxhub.com/blog/published-before-filing) explains why disclosure first can cost you the patent.
2. A one-page non-confidential summary, agreed with your TTO. [How to write a non-confidential summary](https://zernyxhub.com/blog/non-confidential-summary) has a template.
3. A short list of named people. Ten well-chosen companies, each with a person's name, beat a hundred generic addresses. [How to find an industry licensee](https://zernyxhub.com/blog/find-licensee-for-patent) shows how to build the list from your patent's own citations.

## What goes into a pitch email?

| Part | What it says | Length |
|---|---|---|
| Subject line | The reader's problem and your result | Under 10 words |
| Opening | Why you are writing to this person | One sentence |
| Problem and result | What the technology does for them, with one number | Two sentences |
| Status | Patent filed or granted, and the stage (for example TRL 4) | One sentence |
| Ask | A 20-minute call | One sentence |
| Attachment | The non-confidential summary | One page |

Leave out: your CV, the full abstract of the paper, lists of publications, price or royalty, and anything confidential.

**Five sentences of a pitch email**
1. Why you: One line on why this reader
2. Problem: Their cost, yield or compliance issue
3. Result: One number from your work
4. Status: Patent filed, stage of development
5. Ask: A 20-minute call

## Template 1: the first email

**Subject:** Cutting solvent use in [process] by [x]%: patent-pending method

> Dear Ms [Name],
>
> I saw your team's work on [product line or recent announcement], and I think a method from our lab at [Institution] may help with [the specific problem].
>
> In laboratory trials, our process [result with a number, for example "reduced solvent use by 40% at the same purity"]. A patent application has been filed in India, and the technology is at laboratory validation stage.
>
> I have attached a one-page non-confidential summary. Would you have 20 minutes in the next two weeks for a call? Our technology transfer office, copied here, can arrange an NDA if you would like to see the data.
>
> Regards,
> [Name], [Designation], [Department, Institution]

Notice what it does. The reader sees her own problem in the first line, a number in the second paragraph, and a small, easy request at the end. Copying the TTO tells her that the institution is behind the offer and that an agreement is possible.

## Template 2: the follow-up

Send this about two weeks later if there is no reply. Add one new piece of information, so the email is worth reading.

**Subject:** Re: Cutting solvent use in [process]: new stability data

> Dear Ms [Name],
>
> A short follow-up on my note of [date]. Since then we have [new, non-confidential fact, for example "repeated the result at 5-litre scale"].
>
> If this is not a priority for your team, a one-line reply would help me close my notes. If someone else handles new technologies, I would be grateful for their name.
>
> Regards,
> [Name]

Keep the second follow-up, if you send one, even shorter: two lines with a link to a new talk, poster or result, and a thank-you. After that, stop. A company that has not replied to three emails is telling you something, and your time is better spent on the next name on your list. Record the outcome in the shared contact sheet, because the same company may be the right fit for a different technology from your department next year.

Asking for a referral is often what gets the reply. Many technology decisions sit with R&D or business development heads the inventor has never met.

## Template 3: when a company replies with interest

The temptation is to send everything at once. Resist it. The reply should move the conversation to a call and an NDA, with the TTO in charge of the paperwork.

**Subject:** Re: [original subject]: next steps

> Dear Mr [Name],
>
> Thank you for your interest. I am copying [TTO contact], who handles agreements for [Institution]. Once the NDA is signed, I will share the full data, including [type of data].
>
> For our call, could you tell me which application or product you have in mind? It will help me bring the right results.
>
> Regards,
> [Name]

From here, the TTO leads on terms. A licence is valid only when it is in writing with all its terms and duly executed, under section 68 of the Patents Act, so promises made in emails do not bind either side, and can cause confusion later. Keep the emails about the science and the fit.

## Subject lines that get opened

| Weak | Stronger | Why |
|---|---|---|
| Collaboration opportunity with [Institution] | 40% less solvent in [process]: patent-pending | Says what is in it for the reader |
| Novel nanomaterial technology | Coating that lasts 2x longer in salt spray tests | Names a result |
| Request for meeting | 20 minutes on [their product] corrosion | Specific and small |

**Two opening lines for the same technology**
Lab first:
- Our lab has published 40 papers
- We work on novel catalysts
- Reader must guess the benefit
Reader first:
- Your plant's solvent cost
- 40% less in lab trials
- Benefit in the first line
Lead with their problem and one number.

## What should faculty never send?

- Process conditions, compositions, sequences, code or drawings before the patent application is filed and an NDA is signed.
- Price, royalty or exclusivity offers. These are institutional decisions, set by your IP policy and negotiated by the TTO.
- Claims you cannot support. If your result came from one batch, say "in initial trials". Industry readers forgive an early stage; they do not forgive an overstatement found later.
- Mass emails. A blind-copied list of fifty companies reads as spam and can reach a competitor of your eventual licensee.

## How the TTO fits in

Your institution usually owns the IP, under its IP policy, and it signs the NDA, the option or the licence. Involve it from the first email: copy the TTO contact, agree the summary with them, and keep a shared record of who you wrote to and when. That record also stops two people in your department writing to the same company with different stories. [Licensing income sharing](https://zernyxhub.com/blog/faculty-royalty-sharing) explains what the inventor receives once a deal is signed.

I will offer one opinion plainly. The best pitch email is the one written for a single named reader, even if that means writing ten different emails. Use a template for structure, and then rewrite it around why this particular company should care.

For help preparing outreach, TT Co-Pilot, Zernyx's AI assistant for technology transfer, is built for TTO teams and university faculty, on Zernyx's proprietary technology licensing dataset. For the slides that follow a successful email, see [how to pitch your lab technology to industry](https://zernyxhub.com/blog/pitch-lab-technology-to-industry).

## Common questions

### How long should a licensing pitch email be?

Short enough to read on a phone in a minute: about 100 to 150 words, five or six sentences. Put the detail in a one-page non-confidential summary attached to the email, and save data for after an NDA.

### Can a faculty member email a company directly about a patent?

Yes, and companies often prefer to hear from the inventor first. But the institution usually owns the patent and must sign any NDA, option or licence, so copy or brief the technology transfer office or IPR cell from the start.

### What should I never put in a pitch email?

Anything that would let a reader reproduce the invention before your patent application is filed: compositions, process conditions, code or drawings. Also leave out prices and terms. Those are for the TTO to negotiate once there is interest.

### How many times should I follow up?

Once or twice. A short follow-up after about two weeks, with one new piece of information, is normal. After the second follow-up with no reply, move to the next company on your list.

---

Published by Zernyx Hub. More: https://zernyxhub.com/llms.txt
