# Stability testing for a licensed cosmetic product: what Indian rules expect

URL: https://zernyxhub.com/blog/cosmetic-stability-testing-india
Author: Dr. Abhay Tharmatt, Research Scientist, R&D, Zernyx Innovations
Published: 2026-11-09
Category: Technology transfer

> Cosmetic stability testing in India for licensees: what the Cosmetics Rules 2020 require on expiry, standards and records, and how to plan a stability study.

**Short answer:** India's Cosmetics Rules, 2020 do not prescribe a stability test method, but they require a use-before or expiry date on the label, compliance with the specifications in the Ninth Schedule, testing in your own facility or an approved NABL-accredited laboratory, and records kept for set periods. A stability study is how a manufacturer justifies its expiry date.

A licensed cosmetic formulation arrives with a lab report that says it is stable. Then the licensee makes it in a 200-kilogram vessel, fills it into a pump bottle from a new supplier and ships it to a warehouse in Nagpur in May. Six months later, a customer complains that the cream has separated. The formula did not change. Everything around it did.

Stability testing is how a manufacturer finds that out before the customer does. This guide explains what India's Cosmetics Rules, 2020 actually require, what a stability study should cover, how to plan one for a licensed product, and the mistakes that lead to failed batches.

## What do the Cosmetics Rules 2020 require?

The [Cosmetics Rules, 2020](https://www.thc.nic.in/Central%20Governmental%20Rules/e%20Cosmetics%20Rules,%202020.pdf) do not prescribe a stability method. They set requirements that a stability study supports:

| Rule | Requirement | Link to stability |
|---|---|---|
| Rule 34(1)(c) | Labels carry a use-before or expiry date, or expiry a number of months from manufacture | The date must be justified |
| Rule 39(1) | No cosmetic may be manufactured or imported unless it meets the specifications in the Ninth Schedule | The product must still meet them at the end of its shelf life |
| Rule 26(c) | The manufacturer keeps its own testing facilities or tests at a laboratory approved under the Rules and accredited by NABL | Who runs the tests |
| Rule 26(f) | Batch manufacturing records kept for three years after the batch's expiry date | Covers the full shelf life you claim |
| Rule 26(h) | Test records kept for three years from the date of manufacture | Keep stability data at least until three years after expiry, to meet both |
| Rules 23 and 25 | Manufacturing licence applied for in Form COS-5 and granted in Form COS-8 | Licence before commercial manufacture |
| Rule 18(2) | For imports, the remaining shelf life must be later than six months from the date of import | Importers need enough shelf life left |

The Ninth Schedule ties many products to Bureau of Indian Standards specifications. Check which Indian Standard applies to your product type, and test against it at the start and end of the study.

## What guidance can you follow?

[ISO/TR 18811:2018](https://www.iso.org/standard/63465.html), Cosmetics: Guidelines on the stability testing of cosmetic products, is an international technical report. It is guidance, not a mandatory Indian standard. Many manufacturers use it to structure a study, because it gives a plan that can be explained to a regulator, a retailer or a licensor.

## What should a stability study test?

| Parameter | What changes | Why it matters |
|---|---|---|
| Appearance and colour | Separation, darkening, crystals | First thing a customer notices |
| Odour | Fragrance fading or turning | Complaints and returns |
| pH | Drift over time | Skin compatibility, preservative performance |
| Viscosity | Thinning or thickening | Pump and tube performance |
| Active ingredient level | Loss of the active | Any claim on the label |
| Microbial quality | Growth over time | Safety |
| Packaging compatibility | Leaching, absorption, pump failure | The pack is part of the product |

The pack matters as much as the formula. A cream stable in a glass jar may fail in a plastic tube that lets water escape or lets fragrance into the wall.

**Planning a stability study for a licensed formula**
1. Collect licensor data: Conditions, results, gaps
2. Make batches at your scale: Your materials, your process
3. Fill the final pack: The pack you will sell
4. Store and test: Several conditions, set intervals
5. Set the expiry date: From your own data

## How does licensing change the study?

A licensor's stability report describes the product the licensor made: its raw material grades, its lab equipment, its container. Your product differs on each. Before relying on the licensor's data, ask:

- At what scale and in what pack was the study done?
- At what conditions and for how long?
- Which parameters were tested, and what were the limits?
- Were any failures seen, and how were they fixed?

Then repeat the study on your own batches. Build the expectation into the licence: the licensor shares its full stability data, and supports you if your batches behave differently. [Scaling a licensed cosmetic formulation](https://zernyxhub.com/blog/scale-up-licensed-cosmetic-formulation) covers the scale-up steps that come before the study.

## A worked example

**Illustration with invented figures and plan.** A Vadodara company licenses a vitamin C serum formula and plans its stability study.

| Item | Detail |
|---|---|
| Batches | Three pilot batches at 50 kg |
| Pack | 30 ml airless pump bottle |
| Storage conditions | Room temperature, an elevated temperature and a cold cycle, chosen with guidance from ISO/TR 18811 |
| Test points | 0, 1, 3, 6 and 12 months |
| Parameters | Appearance, odour, pH, viscosity, vitamin C content, microbial quality, pump function |
| Testing cost at an outside NABL-accredited lab | ₹1,80,000 |
| Expiry decision | Provisional 12 months from early data, confirmed from real-time results |

The company launches with a 12-month expiry and extends it only when real-time data supports a longer date. Vitamin C content is the critical parameter; if it falls below the label claim before expiry, the date is too long.

**Stability test points in this illustration**
- Month 0, Baseline tests: All parameters, all batches
- Month 1, First check: Early warning on separation
- Month 3, Provisional data: Supports a launch date
- Month 6, Mid-point: Active content trend
- Month 12, Real-time result: Confirms the expiry

## What if a stability batch fails?

A failure during the study is useful information, not a disaster, if you act on it before launch.

| Failure | Likely causes | First steps |
|---|---|---|
| Separation or creaming | Emulsifier level, mixing speed or cooling rate at scale | Compare process records with the licensor's lab method |
| pH drift | Raw material grade, interaction with the pack | Test the formula in glass to isolate the pack |
| Loss of active | Oxidation, light, temperature | Check the pack's light and oxygen barrier |
| Viscosity change | Thickener grade, process shear | Review mixing and the thickener supplier |
| Microbial growth | Preservative level or compatibility | Review the preservative system with the licensor |

Change one thing at a time and restart the study on the changed batch. If the cause lies in the licensed formula itself, the licence's support clause should bring the licensor in.

## What should the licence say about stability?

| Clause | What to agree |
|---|---|
| Data | The licensor hands over its full stability data, including failures |
| Support | The licensor helps investigate if your batches fail stability |
| Changes | Who may change the formula to fix a stability problem, and who owns the change |
| Claims | Whether you may use the licensor's data in labels or marketing |

## Common mistakes

- Printing the licensor's expiry date without your own data.
- Testing in a different pack from the one you sell.
- Testing only appearance and pH, and not the active.
- Changing a raw material supplier without repeating stability.
- Keeping stability data apart from batch records.

My view: for a licensed cosmetic, the licensee's own stability study on its own pack is not optional, whatever the licensor's data shows. I am less certain how each state licensing authority reviews stability evidence at inspection, because the Rules do not set a method; keep a written study plan ready to show.

[Zernyx Labs](https://zernyx.com/zernyx-labs-overview) does prototyping and lab R&D for biotech, pharma and cosmetics.

## Common questions

### Do the Cosmetics Rules 2020 require stability testing?

They do not set out a stability test method. They require the label to show a use-before or expiry date, the product to meet the specifications in the Ninth Schedule, and testing in your own facility or an approved NABL-accredited laboratory. Stability data is the evidence behind the expiry date you print.

### What guidance exists for cosmetic stability testing?

ISO/TR 18811:2018, Cosmetics: Guidelines on the stability testing of cosmetic products, is an international technical report giving guidance. It is not a mandatory Indian standard, but it is a sound basis for a study plan you can defend.

### Can I use the licensor's stability data for my product?

Use it as a starting point only. Stability depends on your raw material grades, process and packaging. Repeat the study on batches made at your scale in the final pack before relying on an expiry date.

### How long must cosmetic manufacturing records be kept in India?

Under the Cosmetics Rules, 2020, Rule 26(f) requires batch manufacturing records to be kept for three years after the batch's expiry date, and Rule 26(h) requires test records to be kept for three years from the date of manufacture. Keeping stability data until three years after expiry meets both.

---

Published by Zernyx Hub. More: https://zernyxhub.com/llms.txt
