GuideTechnology transfer

Stability testing for a licensed cosmetic product: what Indian rules expect

Cosmetic stability testing in India for licensees: what the Cosmetics Rules 2020 require on expiry, standards and records, and how to plan a stability study.

By Dr. Abhay Tharmatt, Research Scientist, R&D, Zernyx Innovations 6 min read
Short answer

India's Cosmetics Rules, 2020 do not prescribe a stability test method, but they require a use-before or expiry date on the label, compliance with the specifications in the Ninth Schedule, testing in your own facility or an approved NABL-accredited laboratory, and records kept for set periods. A stability study is how a manufacturer justifies its expiry date.

A licensed cosmetic formulation arrives with a lab report that says it is stable. Then the licensee makes it in a 200-kilogram vessel, fills it into a pump bottle from a new supplier and ships it to a warehouse in Nagpur in May. Six months later, a customer complains that the cream has separated. The formula did not change. Everything around it did.

Stability testing is how a manufacturer finds that out before the customer does. This guide explains what India's Cosmetics Rules, 2020 actually require, what a stability study should cover, how to plan one for a licensed product, and the mistakes that lead to failed batches.

What do the Cosmetics Rules 2020 require?

The Cosmetics Rules, 2020 do not prescribe a stability method. They set requirements that a stability study supports:

Rule Requirement Link to stability
Rule 34(1)(c) Labels carry a use-before or expiry date, or expiry a number of months from manufacture The date must be justified
Rule 39(1) No cosmetic may be manufactured or imported unless it meets the specifications in the Ninth Schedule The product must still meet them at the end of its shelf life
Rule 26(c) The manufacturer keeps its own testing facilities or tests at a laboratory approved under the Rules and accredited by NABL Who runs the tests
Rule 26(f) Batch manufacturing records kept for three years after the batch's expiry date Covers the full shelf life you claim
Rule 26(h) Test records kept for three years from the date of manufacture Keep stability data at least until three years after expiry, to meet both
Rules 23 and 25 Manufacturing licence applied for in Form COS-5 and granted in Form COS-8 Licence before commercial manufacture
Rule 18(2) For imports, the remaining shelf life must be later than six months from the date of import Importers need enough shelf life left

The Ninth Schedule ties many products to Bureau of Indian Standards specifications. Check which Indian Standard applies to your product type, and test against it at the start and end of the study.

What guidance can you follow?

ISO/TR 18811:2018, Cosmetics: Guidelines on the stability testing of cosmetic products, is an international technical report. It is guidance, not a mandatory Indian standard. Many manufacturers use it to structure a study, because it gives a plan that can be explained to a regulator, a retailer or a licensor.

What should a stability study test?

Parameter What changes Why it matters
Appearance and colour Separation, darkening, crystals First thing a customer notices
Odour Fragrance fading or turning Complaints and returns
pH Drift over time Skin compatibility, preservative performance
Viscosity Thinning or thickening Pump and tube performance
Active ingredient level Loss of the active Any claim on the label
Microbial quality Growth over time Safety
Packaging compatibility Leaching, absorption, pump failure The pack is part of the product

The pack matters as much as the formula. A cream stable in a glass jar may fail in a plastic tube that lets water escape or lets fragrance into the wall.

Planning a stability study for a licensed formula

1
Collect licensor dataConditions, results, gaps
2
Make batches at your scaleYour materials, your process
3
Fill the final packThe pack you will sell
4
Store and testSeveral conditions, set intervals
5
Set the expiry dateFrom your own data

How does licensing change the study?

A licensor's stability report describes the product the licensor made: its raw material grades, its lab equipment, its container. Your product differs on each. Before relying on the licensor's data, ask:

  • At what scale and in what pack was the study done?
  • At what conditions and for how long?
  • Which parameters were tested, and what were the limits?
  • Were any failures seen, and how were they fixed?

Then repeat the study on your own batches. Build the expectation into the licence: the licensor shares its full stability data, and supports you if your batches behave differently. Scaling a licensed cosmetic formulation covers the scale-up steps that come before the study.

A worked example

Illustration with invented figures and plan. A Vadodara company licenses a vitamin C serum formula and plans its stability study.

Item Detail
Batches Three pilot batches at 50 kg
Pack 30 ml airless pump bottle
Storage conditions Room temperature, an elevated temperature and a cold cycle, chosen with guidance from ISO/TR 18811
Test points 0, 1, 3, 6 and 12 months
Parameters Appearance, odour, pH, viscosity, vitamin C content, microbial quality, pump function
Testing cost at an outside NABL-accredited lab ₹1,80,000
Expiry decision Provisional 12 months from early data, confirmed from real-time results

The company launches with a 12-month expiry and extends it only when real-time data supports a longer date. Vitamin C content is the critical parameter; if it falls below the label claim before expiry, the date is too long.

Stability test points in this illustration

Month 0Baseline testsAll parameters, all batches
Month 1First checkEarly warning on separation
Month 3Provisional dataSupports a launch date
Month 6Mid-pointActive content trend
Month 12Real-time resultConfirms the expiry

What if a stability batch fails?

A failure during the study is useful information, not a disaster, if you act on it before launch.

Failure Likely causes First steps
Separation or creaming Emulsifier level, mixing speed or cooling rate at scale Compare process records with the licensor's lab method
pH drift Raw material grade, interaction with the pack Test the formula in glass to isolate the pack
Loss of active Oxidation, light, temperature Check the pack's light and oxygen barrier
Viscosity change Thickener grade, process shear Review mixing and the thickener supplier
Microbial growth Preservative level or compatibility Review the preservative system with the licensor

Change one thing at a time and restart the study on the changed batch. If the cause lies in the licensed formula itself, the licence's support clause should bring the licensor in.

What should the licence say about stability?

Clause What to agree
Data The licensor hands over its full stability data, including failures
Support The licensor helps investigate if your batches fail stability
Changes Who may change the formula to fix a stability problem, and who owns the change
Claims Whether you may use the licensor's data in labels or marketing

Common mistakes

  • Printing the licensor's expiry date without your own data.
  • Testing in a different pack from the one you sell.
  • Testing only appearance and pH, and not the active.
  • Changing a raw material supplier without repeating stability.
  • Keeping stability data apart from batch records.

My view: for a licensed cosmetic, the licensee's own stability study on its own pack is not optional, whatever the licensor's data shows. I am less certain how each state licensing authority reviews stability evidence at inspection, because the Rules do not set a method; keep a written study plan ready to show.

Zernyx Labs does prototyping and lab R&D for biotech, pharma and cosmetics.

Common questions

Do the Cosmetics Rules 2020 require stability testing?

They do not set out a stability test method. They require the label to show a use-before or expiry date, the product to meet the specifications in the Ninth Schedule, and testing in your own facility or an approved NABL-accredited laboratory. Stability data is the evidence behind the expiry date you print.

What guidance exists for cosmetic stability testing?

ISO/TR 18811:2018, Cosmetics: Guidelines on the stability testing of cosmetic products, is an international technical report giving guidance. It is not a mandatory Indian standard, but it is a sound basis for a study plan you can defend.

Can I use the licensor's stability data for my product?

Use it as a starting point only. Stability depends on your raw material grades, process and packaging. Repeat the study on batches made at your scale in the final pack before relying on an expiry date.

How long must cosmetic manufacturing records be kept in India?

Under the Cosmetics Rules, 2020, Rule 26(f) requires batch manufacturing records to be kept for three years after the batch's expiry date, and Rule 26(h) requires test records to be kept for three years from the date of manufacture. Keeping stability data until three years after expiry meets both.

Dr. Abhay Tharmatt
About the author

Dr. Abhay Tharmatt

Research Scientist, R&D, Zernyx Innovations

Connect on LinkedIn
More about Dr. Abhay Tharmatt
  • Ph.D. in Pharmaceutical Sciences, BITS Pilani.

Need lab R&D or a prototype?

Zernyx Labs does prototyping and lab R&D for biotech, pharma and cosmetics.

Talk to Zernyx Labs

Keep reading

Looking for something else?